Product Introduction

The FHFBT type cable fire blanket is a cable joint fire blanket independently developed by our company. It is composed of silicon-titanium alloy cloth and a protective inner liner. The protective inner liner is made up of a four-layer structure: composite high-temperature resistant ceramic fiber cloth, 304 stainless steel plate, waterproof and fireproof cloth, and high-temperature insulating cloth. This product has a simple structure, strong fireproof and explosion-proof performance, and good flexibility It is easy to install and mainly used for wrapping the ends between cables. Reusable.

Technical indicators

1. Arc resistance: The arc resistance lasts for more than 240 seconds, and the fire blanket shows no damage or fire.

2. Anti-aging: The fireproof blanket remained unchanged for 168 hours at 70°C.

3. Acid and alkali resistance: After soaking in a 5% hydrochloric acid solution for 360 hours, there is no swelling. After soaking in 1% sodium hydroxide for 360 hours, there was no obvious change.

4. Fire resistance performance: When the fire blanket is exposed to an open flame for 120 minutes, there is no obvious change.

5. Waterproof performance: The fireproof blanket shows no obvious change after being soaked in water K at 20°C for 360 hours.

6. Tensile strength: ≥3.5MPa

7. Tear strength :≥20KN/m

8. Volume resistivity :≥1×10¹³(Ω-cm)

9. Breakdown strength :≥20kV/mm

Product Specification

1300*1000*4mm     1200*1000*4mm     1000*1000*4mm

Other specifications can be customized

Functional requirements

1. The entire set of facilities is made of flexible materials, with wide adaptability, and can meet various complex and narrow installation environments on site.

2. It is heat-resistant, non-flammable and has good heat insulation performance.

3. It has strong anti-explosion ability. The mechanical strength of the explosion-proof core material is five times that of steel wire of the same mass.

4. Resistant to cutting, wear and corrosion.

5. Simple structure, fixed with explosion-proof and fire-resistant cable ties, and easy to install.

6. It is aesthetically pleasing as a whole and can be reused.

7. The surface of the explosion-proof outer coating is coated with an insulating and waterproof layer to ensure that the facilities can be used normally in environments such as condensation, rain, and immersion.